Menu
Back
  1. Products
  2. Automation technology - Data transmission
  3. M12-X
  4. M12 Female cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67
Part no.: 99 3788 810 08

M12 Female cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67

M12-X, series 825, Automation Technology - Data Transmission
Compare product
Downloads
General features
Moreless
Part no. 99 3788 810 08
Connector design Female cable connector
Type standard DIN EN 61076-2-109
Version Connector socket straight
Connector locking system screw
Termination IDC
Degree of protection IP67
Cross-sectional area AWG 27-22
Cable outlet 5.5-9.0 mm
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 48.25
Customs tariff number 85369010
Country of Origin DE
Rated voltage 50 V (AC) / 60 V (DC)
Rated impulse voltage 800 V
Rated current 0.5 A
Pollution degree 3
Transmission rate CAT 6A
Overvoltage category II
Insulating material group II
EMC compliance shieldable
Shield connection Shield clamping
Housing material Brass nickel-plated / Zinc die-cast nickel-plated
Contact body material PA
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material Zinc die-cast nickel-plated
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number acca9673-7397-4d23-bcde-4f7f21176af0
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  6. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  7. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  8. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Downloads
Data sheet
Data sheet 99 3788 810 08
PDF
REACH
99 3788 810 08
PDF
RoHS
99 3788 810 08
PDF
China RoHS
99 3788 810 08
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
M12-X
99 3788 810 08